Look at these beauties….. A genuine pair of OEM Nissin fully refurbished front brake calipers. 90mm between mounting hole centres, and will fit other Suzuki/Kawasaki models as an upgrade. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Had been well looked after in a previous life, but have benefited by the following. Fully stripped and cleaned. New stainless steel mounting bolts. New stainless steel caliper half bolts. New banjo bolts and crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. All backing shims are fitted to the new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, March 4, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
- Country/Region of Manufacture: Japan
- Unit Quantity: 1
- Type: Complete Caliper
- Brand: NISSIN
