Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Genuine Suzuki Tokico (OEM) fully refurbished front brake calipers. They are common fitment calipers, so will fit other models also, including Suzuki GSF600 (Mark 2), GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers. THE MOUNTING BOLTS SUPPLIED ARE FOR A SUZUKI FITMENT. Also fits some Kawasakis GPZ1100, ER6, ER6F, Vulcan VN1600 and others, again, please double-check on a Kawasaki forum. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also. New stainless banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using translucent silicone brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Complete with stainless steel brake pad pins, but NO PADS. Fit pads, bolt on, bleed and go (after checking the operation of the brakes and checking for any leakage). I think mine are priced reasonably well, for the work and expense that have gone into them. Any questions about fitment – please message me. I might be able to help. Please check photos CAREFULLY against your old calipers. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI BANDIT MARK 2 FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Monday, March 16, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Bangladesh, Belize, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Cambodia, Saint kitts and nevis, Liechtenstein, Macao, Monaco, Martinique, Pakistan, Paraguay, Turks and caicos islands, Aruba, Saudi arabia, United arab emirates, Bahamas, Kuwait, Philippines, Qatar, Uruguay.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Brand: Tokico
Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated

SUZUKI GSF600 BANDIT MK1 FRONT BRAKE CALIPERS. THESE HAVE BEEN STRIPPED, SANDBLASTED THEN POWDER COATED. NEW SEALS FITTED AND PISTONS POLISHED. The item “Suzuki bandit GSF 600 mk1 front brake calipers refurbished powder coated” is in sale since Wednesday, April 22, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “aake3161″ and is located in Ventnor. This item can be shipped worldwide.
  • Type: Complete Caliper
  • Brand: Suzuki
Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Suzuki Bandit Mark 2 Fully Refurbished Front Brake Calipers

Genuine Suzuki Tokico (OEM) fully refurbished front brake calipers. They are common fitment calipers, so will fit other models also, including Suzuki GSF600 (Mark 2), GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers. Also fits some Kawasakis GPZ1100, ER6, ER6F, Vulcan VN1600 and others, again, please double-check on a Kawasaki forum. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also. New stainless banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using translucent silicone brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Complete with stainless steel brake pad pins, but NO PADS. Fit pads, bolt on, bleed and go (after checking the operation of the brakes and checking for any leakage). I think mine are priced reasonably well, for the work and expense that have gone into them. Any questions about fitment – please message me. I might be able to help. Please check photos CAREFULLY against your old calipers. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI BANDIT MARK 2 FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Thursday, February 27, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Brand: Tokico
Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Suzuki 600 Bandit (and Others) Nissin Fully Refurbished Front Brake Calipers

Genuine Suzuki 600 Bandit Mark 1 (OEM) Nissin fully refurbished front brake calipers. They are a very common design of caliper and are also fitted to many other makes/models of bikes. The calipers and bracketry are identical to the early Honda VFR750, Suzuki 600 Bandit (Mark 1) and will fit the Honda Hornet 600 and some later Honda CBF1000 models. They have been fully stripped and cleaned. Brake fluid galleries have been cleaned out. All calcified crud has been removed from the seal grooves. Pistons are in excellent condition and have been polished. Bodies are excellent also. New banjo bolts and copper washers. New bleed nipples and rubber caps. New stainless steel caliper mounting bolts. Comes complete with brand new brake pads. Carefully reassembled using translucent silicone brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Ready to bolt on and bleed. I doubt you will find a cleaner pair for sale on here. Mine are priced for a quick sale. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI 600 BANDIT (AND OTHERS) NISSIN FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Tuesday, July 2, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Brand: Nissin
NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS

Genuine Nissin (OEM) refurbished Mark 1 1200 Bandit and Triumph front brake calipers. 90mm between mounting hole centres. Will fit early GSXR also, and other makes/models but check with a Suzuki owners forum or a dealer to confirm. Came from a Triumph and the previous owner removed the Triumph logo from the front faces. Fully stripped and cleaned. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. New stainless steel caliper half bolts. Some of the pistons show corrosion on the top edges which is common for a caliper of this age but it in no way affects the seals. Bodies are excellent also, showing no signs of pitting or corrosion. All threads are good. All fluid galleries have been cleaned out. Comes complete with pad springs, existing pad pins (not pictured), but no pads. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. In good, overall condition. (Fowlers, Nov 18), so I think mine are priced reasonably fair. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “NISSIN 90mm SUZUKI BANDIT / TRIUMPH REFURBISHED FRONT BRAKE CALIPERS” is in sale since Monday, April 8, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Brand: Nissin
Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Genuine Kawasaki ER6 Tokico (OEM) fully refurbished front brake calipers. Came from a very low mileage ER6. They are common fitment calipers, so will fit other models also (GSF600 Mark 2, GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers). Also fits some other Kawasakis (GPZ1100, ER6F, Vulcan VN1600, again, please check on a Kawasaki forum). The Kawsaki fitments have smaller 27mm pistons and longer caliper bracket mounting bolts, but the bodies and mounting brackets are identical. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also, with clean crisp machined edges. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Com plete with the original Kawasaki pads which have been professionally cleaned and refitted because they are great for a few thousand miles more. I think mine are priced reasonably well, for the work and expense that have gone into them. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “KAWASAKI ER6 SV650 DL SUZUKI BANDIT FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Saturday, March 2, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Brand: Tokico
  • Non-Domestic Product: No
  • Custom Bundle: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Kawasaki Er6 Sv650 DL Suzuki Bandit Fully Refurbished Front Brake Calipers

Genuine Kawasaki ER6 Tokico (OEM) fully refurbished front brake calipers. Came from a very low mileage ER6. They are common fitment calipers, so will fit other models also (GSF600 Mark 2, GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers). Also fits some other Kawasakis (GPZ1100, ER6F, Vulcan VN1600, again, please check on a Kawasaki forum). The Kawsaki fitments have smaller 27mm pistons and longer caliper bracket mounting bolts, but the bodies and mounting brackets are identical. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also, with clean crisp machined edges. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Com plete with the original Kawasaki pads which have been professionally cleaned and refitted because they are great for a few thousand miles more. I think mine are priced reasonably well, for the work and expense that have gone into them. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “KAWASAKI ER6 SV650 DL SUZUKI BANDIT FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Wednesday, February 20, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Brand: Tokico
  • Non-Domestic Product: No
  • Custom Bundle: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Suzuki 1200 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Genuine Nissin (OEM) fully refurbished Mark 1 1200 Bandit front brake calipers. 90mm between mounting hole centres. Will fit early GSXR also, and other makes/models but a Suzuki owners forum or a dealer to confirm. Fully stripped and cleaned. New stainless steel banjo bolts and copper crush washers. New stainless steel bleed nipples and rubber caps. New pad mounting screws. Pistons are in mint condition and have been polished. Bodies are excellent also, showing no signs of pitting or corrosion. All fluid galleries have been cleaned out. Comes complete with pad springs but no pads. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. I doubt you will find a cleaner pair for sale on here. New prices for these items are 933.65 EACH!!! (Fowlers, Nov 18), so I think mine are priced reasonably fair. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI 1200 BANDIT (OEM) NISSIN FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Wednesday, January 16, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Brand: Nissin
  • Custom Bundle: No
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
Suzuki Bandit 600 650 Sv650 Gsxf Fully Refurbished Front Brake Calipers

Suzuki Bandit 600 650 Sv650 Gsxf Fully Refurbished Front Brake Calipers

Suzuki Bandit 600 650 Sv650 Gsxf Fully Refurbished Front Brake Calipers

Suzuki Bandit 600 650 Sv650 Gsxf Fully Refurbished Front Brake Calipers

Genuine Suzuki SV650S 2005 Tokico (OEM) fully refurbished front brake calipers. They are common fitment calipers, so will fit other models also (GSF600 Mark 2, GSXF750 and others), but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers. Also fits some Kawasakis GPZ1100, ER6, ER6F, Vulcan VN1600 and others, again, please check on a Kawasaki forum. Kawsaki fitment has smaller 27mm pistons and longer caliper bracket mounting bolts. Fully stripped and cleaned. Pistons are in great condition and have been polished. Bodies are excellent also. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. I think mine are priced reasonably well, for the work and expense that have gone into them. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI BANDIT 600 650 SV650 GSXF FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Wednesday, January 2, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Brand: TOKICO
  • Non-Domestic Product: No

Incoming search terms:

  • https://banditfrontbrakes com/2019/01/06/suzuki-bandit-600-650-sv650-gsxf-fully-refurbished-front-brake-calipers/
Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Honda Vfr750 600 Bandit (oem) Nissin Fully Refurbished Front Brake Calipers

Genuine Nissin (OEM) fully refurbished Mark 1 600 Bandit front brake calipers. Will fit VFR750, CBR600 and other, s but you would need to check on a Honda and a Suzuki owners forum or a dealer to confirm. Fully stripped and cleaned. Lots of parts have been replaced, as they were old, corroded or worn out. Pistons are in great condition and have been polished. Bodies are excellent also, showing no signs of pitting or corrosion. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. New stainless steel caliper mounting bracket bolts. Will come complete with the pad pin covers and pad springs. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. I doubt you will find a cleaner pair for sale on here. New prices for these items are 933.65 EACH!!! (Fowlers, Nov 18), so I think mine are priced reasonably fair. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “HONDA VFR750 600 BANDIT (OEM) NISSIN FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Wednesday, January 2, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Brand: Nissin
  • Custom Bundle: No
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1