600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Just fit pads (not supplied), bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Sunday, February 21, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98

International Buyers Please Note. SUZUKI GSX F 600CC model year 1989. SUZUKI GSF 400 Bandit K GK75B 1989. SUZUKI twin front discs GSF 400 Bandit P, R GK75B F610 1993 – 1994. SUZUKI GSF 400 Bandit N NK GK75A 1989. SUZUKI GSF 400 Bandit N NP GK75A 1993. SUZUKI GSF 400 Bandit V VM, VP, VR GK75A 1991 – 1994. SUZUKI GSF 400 Bandit V VS, VT, VV GK75A 1995 – 1997. SUZUKI GSF 400 Bandit VZ VZM GK75A 1991. SUZUKI GSF 400 Bandit VZ VZR, VZP GK75A 1993 – 1994. SUZUKI GSF 400 Bandit VZ VZV GK75A 1997. SUZUKI GSF 400 Bandit S, T, V GK75B 1995 – 1997. Suzuki GSX-R400 V Front 89. Suzuki GSX400 Impulse (Japan) R, S, T X Front 94-96 99 05. Suzuki GSX400 Impulse X X K5 GK79A 1999 2005. Suzuki GSX400 SS N Katana Front 92. Suzuki RF400 R P, R, T 93-96. Suzuki RF 400 RV T, V GK78A GK78A 96-97. Condition: 100% Brand new, never mounted. PRICE :2 PCS FRONT ROTORS 290MM + 19.5MM OFFSET. OD:290mm ID:64mm THICKNESS:5mm NO OF HOLES:5 BOLT PATTERN:86mm HOLE SIZE:10.4mm HEIGHT:19.5mm. Material: Stainless steel 420 (2Cr13) & Aluminum alloy 6061. The shape of the disc ensures good heat dissipation under heavy braking sessions, reducing brake fade, minimising warping, and ensuring rotor longevity. The slotting on the brake surface ensure water and dirt are dispersed quickly, and also reduce weight. We marked the Min Thickness on the surface , it means you should replace the brake disc rotor when the thickness with Minimum Thickness to ensure save ridding. Which is specialized in motorcycle CNC. Aluminum parts, involved in various famous brands like: HONDA, YAMAHA, SUZUKI, KAWASAKI, DUCATI, APRILIA, BMW, KTM etc. We’ve gotten brake discs rotors and levers for any model on the market from 1988 onward. And we also offer CNC mirrors, rims, gas cap, rear sets, footpegs, clip on and other motorcycle aluminum parts. And more, Our own team can design and make new designs based on your original samples, new entrant are also welcome. We also accept wholesale orders and could custom motorcycle parts for you. Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “Front Brake Discs Disk For GSX600F 89-97 GSX750F 89-03 SV650S 99-02 RF600R 93-98″ is in sale since Friday, February 26, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “skywave-uk” and is located in Glenfield LE3 8DX. This item can be shipped to all countries in Europe.
  • Brand: skywave
  • Manufacturer Part Number: WDZC903GOL2-SK-UK-0226
  • Intended Use: Replacement Part
  • Machine Type: Street Motorcycle
  • Colour: Gold
  • Modified Item: Yes
  • UPC: Does not apply
  • EAN: Does not apply
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • Type: Brakes
  • Material: Stainless Steel
  • Style: Wave
  • Product Type: Brake Discs
  • Rotor Size: 290mm
  • Floating: Yes
  • To Fit Make: Suzuki
  • Sub-Type: Brake Discs
  • OFFSET: 19.5MM
  • Brand Equivalent EBC: MD3003X
No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, February 18, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs

Rearsets & Forward Control. Pipe Muffler Exhaust Silencer. For Harley Davidson Parts. Seat Pan Hump Tail. One way starter Assy Parts. For Sea Doo Parts. Offset height: 19.5mm. 100% neuf, never mounted. Braking Surface Made of Stainless Steel 420 (2cr13). Centre hub Made of 6061 Aluminium alloy CNC Machined. Wave design Light weight and good heat dissipation. Spacers can reduce warping and make more alignment with brake pads. New scraper slot system to keep your brake system clean and run cooler. The slotting on the brake surface ensure water and dirt are dispersed quickly. We marked the Min Thickness on the surface , it means you should replace the brake disc rotor when the thickness with Minimum Thickness to ensure save ridding. Includes 2pcs Semi-Floating Brake Discs Disks. Smad factory since 2009, specialized in high quality aluminum motorcycle parts and accesseries. Main products including: brake disc rotors, rearsets, forward controls, wheel sets, footpegs, radiators , and other aluminum parts. Welcome for any inquiry! Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “For SUZUKI GSF 600 Bandit / S 95-04 SV650S 99-02 RF600R 93-98 Front Brake Discs” is in sale since Friday, February 26, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “faybuy-uk” and is located in Glenfield LE3 8DX. This item can be shipped to United Kingdom.
  • Brand: faybuy
  • Manufacturer Part Number: WDZC903GOL2-FB-UK-0226
  • Intended Use: Replacement Part
  • Machine Type: Street Motorcycle
  • Colour: Gold
  • Unit Quantity: 2 pcs
  • UPC: Does not apply
  • EAN: Does not apply
  • Warranty: 1
  • Type: brake
  • Material: Stainless Steel 420 (2cr13) and Aluminium alloy 6061
  • Style: wave
  • Rotor Size: 290mm
  • Floating: Semi-Floating
  • Finish: CNC Milled & Anodized
  • Compatible Model: RF
  • Rotor Thickness: 5mm
  • Placement on Motorcycle: Front, Left, Right
  • Brand Equivalent EBC: MD3003X
  • Vehicle Type: street bike
600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, February 18, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98

Rearsets & Forward Control. Pipe Muffler Exhaust Silencer. For Harley Davidson Parts. Seat Pan Hump Tail. One way starter Assy Parts. For Sea Doo Parts. Front Rear Brake Discs Disks for SUZUKI GSX 600 750 F 98-03 RF400 R 93-97. Outer diameter: 290mm + 240mm. Inner diameter: 64mm + 89mm. Thickness: 5mm + 5mm. Holes: 5 + 5. Offset height: 19.5mm. SUZUKI RF400 R P, R, T 93-96. SUZUKI RF 400 RV T, V GK78A GK78A 96-97. 100% neuf, never mounted. Braking Surface Made of Stainless Steel 420 (2cr13). Centre hub Made of 6061 Aluminium alloy CNC Machined. Round design and good heat dissipation. Spacers can reduce warping and make more alignment with brake pads. New scraper slot system to keep your brake system clean and run cooler. The slotting on the brake surface ensure water and dirt are dispersed quickly. We marked the Min Thickness on the surface , it means you should replace the brake disc rotor when the thickness with Minimum Thickness to ensure save ridding. Includes 2pcs Semi-Floating Brake Discs Disks. Smad factory since 2009, specialized in high quality aluminum motorcycle parts and accesseries. Main products including: brake disc rotors, rearsets, forward controls, wheel sets, footpegs, radiators , and other aluminum parts. Welcome for any inquiry! Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “Front Rear Brake Discs for Suzuki SV650S 99-02 GSF 600 BANDIT 95-04 RF600R 93-98″ is in sale since Tuesday, October 20, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “faybuy-uk” and is located in Wuxi. This item can be shipped to all countries in Europe.
  • Brand: faybuy
  • Manufacturer Part Number: DZY903BLA2851-FB-UK-1020
  • Intended Use: Replacement Part
  • Machine Type: Street Motorcycle
  • Colour: Black
  • Unit Quantity: 2 pcs
  • UPC: Does not apply
  • EAN: Does not apply
  • Warranty: 1
  • Type: brake
  • Material: Stainless Steel 420 (2cr13) and Aluminium alloy 6061
  • Rotor Size: 290mm + 240mm
  • Floating: Front Discs Semi-Floating
  • Finish: CNC Milled & Anodized
  • Compatible Model: RF
  • Rotor Thickness: 5mm
  • Placement on Motorcycle: Front, Left, Right
  • Brand Equivalent EBC: MD3003X
  • Vehicle Type: street bike
For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks

Other MV AGUSTA Parts. Harley Davidson Disc Disk. HiSUN 400 & more. HiSUN 500 700 & more. Yamaha ATV UTV Accessories. Special price for sale. SUZUKI GSX F 600CC model year 1989. SUZUKI GSF 400 Bandit K GK75B 1989. SUZUKI twin front discs GSF 400 Bandit P, R GK75B F610 1993 – 1994. SUZUKI GSF 400 Bandit N NK GK75A 1989. SUZUKI GSF 400 Bandit N NP GK75A 1993. SUZUKI GSF 400 Bandit V VM, VP, VR GK75A 1991 – 1994. SUZUKI GSF 400 Bandit V VS, VT, VV GK75A 1995 – 1997. SUZUKI GSF 400 Bandit VZ VZM GK75A 1991. SUZUKI GSF 400 Bandit VZ VZR, VZP GK75A 1993 – 1994. SUZUKI GSF 400 Bandit VZ VZV GK75A 1997. SUZUKI GSF 400 Bandit S, T, V GK75B 1995 – 1997. SUZUKI GSX F 750CC FK-FP, FR-FV model year 97. GSX-R400 V Front 89. GSX400 Impulse (Japan) R, S, T X Front 94-96 99 05. GSX400 Impulse X X K5 GK79A 1999 2005. GSX400 SS N Katana Front 92. RF400 R P, R, T 93-96. RF 400 RV T, V GK78A GK78A 96-97. Condition: New, never mounted. Net Weight: 2.9kgs. Price for 2 front discs. Bolt Hole Qty: 5. Bolt Hole Size: 10.4mm. Offset height: 19.5mm. Pls contact with us if you need the Gold Front discs. MIN TH mean: it is time to replace the disc when the thicknness reduce to the size on it. Material: Stainless steel 420 (2Cr13) outer ring and Aluminum alloy 6061 inner ring, center can be anodised , all the products approved in great performance. We Thai-racing Co, Ltd are CNC FACTORY. Which is specialized in motorcycle CNC. Aluminum parts, involved in various famous brands like: HONDA, YAMAHA, SUZUKI, KAWASAKI, DUCATI, APRILIA, BMW, KTM etc. We’ve gotten brake discs rotors and levers for any model on the market from 1988 onward. And we also offer CNC mirrors, rims, gas cap, rear sets, footpegs, clip on and other motorcycle aluminum parts. And more, Our own team can design and make new designs based on your original samples, new entrant are also welcome. We also accept wholesale orders and could custom motorcycle parts for you. Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “For GSF 600 Bandit / S 95-04 GSX 600 750 F 98-03 SV650S Front Brake Discs Disks” is in sale since Wednesday, January 6, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “bikingboy-uk” and is located in Wuxi. This item can be shipped to all countries in Europe.
  • Brand: bikingboy
  • Manufacturer Part Number: RDZY903BLA2-BK-UK-0106
  • Intended Use: Replacement Part
  • UPC: Does not apply
  • EAN: Does not apply
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • Material: Stainless Steel
  • Product Type: Brake Discs
  • Rotor Size: 290mm
  • Floating: Yes
  • To Fit Make: Suzuki
  • To Fit Model: GSXR
  • Reference OE//OEM Number: Does not apply
  • Thickness: 5mm
For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks

Other MV AGUSTA Parts. Harley Davidson Disc Disk. HiSUN 400 & more. HiSUN 500 700 & more. Yamaha ATV UTV Accessories. Special price for sale. SUZUKI GSX F 600CC model year 1989. SUZUKI GSF 400 Bandit K GK75B 1989. SUZUKI twin front discs GSF 400 Bandit P, R GK75B F610 1993 – 1994. SUZUKI GSF 400 Bandit N NK GK75A 1989. SUZUKI GSF 400 Bandit N NP GK75A 1993. SUZUKI GSF 400 Bandit V VM, VP, VR GK75A 1991 – 1994. SUZUKI GSF 400 Bandit V VS, VT, VV GK75A 1995 – 1997. SUZUKI GSF 400 Bandit VZ VZM GK75A 1991. SUZUKI GSF 400 Bandit VZ VZR, VZP GK75A 1993 – 1994. SUZUKI GSF 400 Bandit VZ VZV GK75A 1997. SUZUKI GSF 400 Bandit S, T, V GK75B 1995 – 1997. GSX-R400 V Front 89. GSX400 Impulse (Japan) R, S, T X Front 94-96 99 05. GSX400 Impulse X X K5 GK79A 1999 2005. GSX400 SS N Katana Front 92. RF400 R P, R, T 93-96. RF 400 RV T, V GK78A GK78A 96-97. Condition: New, never mounted. Net Weight: 2.9kgs. Price for 2 front discs. Bolt Hole Qty: 5. Bolt Hole Size: 10.4mm. Offset height: 19.5mm. Pls contact with us if you need the Gold Front discs. The shape designed to help keep brake pads clean and dissipate heat, provides outstanding braking performance and minimum pad wear. The slotting on the brake surface ensure water and dirt are dispersed quickly, and also reduce weight. Anodized in Black color. Suitable for performance street use or racing with new light weight. Material: Made from Racing performance 420 (2Cr13) stainless steel, with CNC 6061 Aluminium alloy centre huball the products approved in great performance. We Thai-racing Co, Ltd are CNC FACTORY. Which is specialized in motorcycle CNC. Aluminum parts, involved in various famous brands like: HONDA, YAMAHA, SUZUKI, KAWASAKI, DUCATI, APRILIA, BMW, KTM etc. We’ve gotten brake discs rotors and levers for any model on the market from 1988 onward. And we also offer CNC mirrors, rims, gas cap, rear sets, footpegs, clip on and other motorcycle aluminum parts. And more, Our own team can design and make new designs based on your original samples, new entrant are also welcome. We also accept wholesale orders and could custom motorcycle parts for you. Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “For GSX 600 750 89-03 GSF650 Bandit S 94-04 SV650S 99-02 Front Brake Discs Disks” is in sale since Wednesday, January 20, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “bikingboy-uk” and is located in Glenfield LE3 8DX. This item can be shipped to United Kingdom.
  • Brand: bikingboy
  • Manufacturer Part Number: WDZC903BLA203-BK-UK-0120
  • Intended Use: Replacement Part
  • Colour: Black
  • UPC: Does not apply
  • EAN: Does not apply
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • Material: Stainless Steel
  • Product Type: Brake Discs
  • Rotor Size: 290mm
  • Floating: Yes
  • To Fit Make: Suzuki
  • To Fit Model: GSXR
  • Reference OE//OEM Number: Does not apply
  • Thickness: 5mm
  • Brand Equivalent EBC: MD3003X
Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02

International Buyers Please Note. Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02. SUZUKI GSF 600 Y/K1/K2/K3/K4 (Naked Bandit) 00-04. SUZUKI GSF 600 SY/K1/K2/K3/K4 (Faired Bandit) 00-04. SUZUKI SV 650 SX/SY/SK1/SK2 (Top Fairing – Non ABS) 99-02. SUZUKI GSX 750 FW/FX/FY/FK1/FK2 98-02. Condition: 100% Brand new, never mounted. OD:290mm ID:64mm THICKNESS:5mm NO OF HOLES:5 BOLT PATTERN:86mm HOLE SIZE:10.4mm HEIGHT:19.5mm. Stainless steel 420 (2Cr13) & Aluminum alloy 6061. The shape of the disc ensures good heat dissipation under heavy braking sessions, reducing brake fade, minimising warping, and ensuring rotor longevity. He slotting on the brake surface ensure water and dirt are dispersed. Quickly, and also reduce weight. We marked the Min Thickness on the surface , it means you should replace the brake disc rotor when the thickness with Minimum Thickness to ensure save ridding. Which is specialized in motorcycle CNC. Aluminum parts, involved in various famous brands like: HONDA, YAMAHA, SUZUKI, KAWASAKI, DUCATI, APRILIA, BMW, KTM etc. We’ve gotten brake discs rotors and levers for any model on the market from 1988 onward. And we also offer CNC mirrors, rims, gas cap, rear sets, footpegs, clip on and other motorcycle aluminum parts. And more, Our own team can design and make new designs based on your original samples, new entrant are also welcome. We also accept wholesale orders and could custom motorcycle parts for you. Due to different time zone, Pls forgive us maybe we couldn’t reply you as quickly as you expected. The item “Front Brake Discs Disks Pads GSX 750 F Bandit GSF 600 / S SV650S SV 650 00 01 02″ is in sale since Tuesday, October 20, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “skywave-uk” and is located in Glenfield LE3 8DX. This item can be shipped to United Kingdom.
  • Brand: skywave
  • Manufacturer Part Number: DZC903G2FA229231-s-uk-1020
  • Intended Use: Replacement Part
  • Machine Type: Street Motorcycle
  • Colour: Gold
  • Modified Item: Yes
  • Country/Region of Manufacture: China
  • UPC: Does not apply
  • EAN: Does not apply
  • Placement on Vehicle: Front
  • Warranty: 1 Year
  • Type: Brakes
  • Material: Stainless Steel
  • Style: Wave
  • Product Type: Brake Discs
  • Rotor Size: 290mm
  • Floating: Yes
  • Sub-Type: Brake Discs Pads
  • OFFSET: 19.5mm
  • Brand Equivalent EBC: MD3003X FA229 FA231