Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

A quality pair of genuine Suzuki Nissin (OEM) fully refurbished front brake calipers. Came from a 1200 Bandit (Mark 1). 90mm between mounting hole centres, so will fit other Suzuki models also. Fully stripped and cleaned. All calcified crud removed from the seal grooves. Brake fluid galleries have been cleaned out. Pistons are in great condition and have been polished. Has been refurbished with the following. New stainless banjo bolts and copper washers. New stainless steel caliper half bolts. New bleed nipples and rubber caps. Complete with top pad springs, pad pins, R clips and brand new semi-sintered pads. Carefully reassembled using silicone clear brake grease on the seals and pistons. Keeps water and salt out and extends the life of the internal parts. Just bolt on and bleed properly. ALWAYS check that there are no leaks after first fitting and before trying them out on the road. As they are new pads they will require’bedding in’ to give optimum performance. Good OEM ones are getting rare to find now. You may not find a complete, cleaner one for sale on here at this price. Any questions about fitment – please message me. I might be able to help. Please check photos CAREFULLY against your old calipers. My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI BANDIT 1200 FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Saturday, June 20, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Bangladesh, Belize, Bermuda, Barbados, Cayman islands, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: NISSIN

Comments

Comments are closed.