Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 N Bandit 95-04

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 N Bandit 95-04

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 N Bandit 95-04. Rezo High Performance Brake Discs. Rezo stainless steel fully floating front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves. Type: Wavy (Contour) Outer Diameter: 290mm Inner Diameter: 64mm Thickness: 5mm Number of Holes: 5 Hole Diameter: 10.5mm Pitch: 86mm Total Height: 19.5mm Disc Type: Fully Floating Hub Colour: Black Weight: 1,210 Grams Each Turning Direction: Universal left or right Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc. The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking. High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low quality discs. Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements. All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units. When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications. Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time. New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs. Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc. We recommend fitting sintered brake pads for the front to give the best braking experience. Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue. A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. We stock a lot of parts in our UK warehouse ready for immediate dispatch but for some larger items such as tyres it is only possible to keep the more popular sizes in stock with the less common tyres incurring a delay in dispatch. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. Thank you for shopping at Motorcycle Parts Warehouse. How do I cancel an order? You have 30 calendar days to return an item from the date you receive it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging. This covers manufacturing faults only and excludes damage caused by the user, misuse or wear and tear. This does not exclude your statutory rights. What if I have bought the wrong size, colour or product? The item must be unused and still in its original packaging with tags. You will be responsible for the costs in returning the goods and ensuring that the goods are packaged safely. What if there is a fault with the product I received? What if I do not like the product I have received? You do have a legal obligation to take good care of the products while they are in your possession and we can only accept items for return if they are unused and have all original tags and packaging. However, if the return is due to the wrong item being ordered or a change of mind etc. Do I need to include anything when sending items back? Welcome to Motorcycle Parts Warehouse, your number one resource for motorcycle parts, motorcycle clothing and motorcycle accessories. We supply OEM parts, aftermarket parts and performance parts for a wide range of motorcycle and scooter models, and stock massive selection motorbike clothing with products from all the top brands. We understand the motorcycle market and work hard to bring you the latest in design and innovation. The majority of our products are sourced directly from manufacturers in the UK and around the World meaning we can offer you competitive prices without compromising on quality. Here at MPW we strive to bring you the very best in both products and service, providing you with a huge selection of motorcycle and scooter parts to choose from and customer service which is second to none. MPW is the best place to shop for all your biking needs. Powered by SixBit’s eCommerce Solution. The item “Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 N Bandit 95-04″ is in sale since Thursday, June 7, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “m-p-w” and is located in Brighton. This item can be shipped to all countries in Europe.
  • Manufacturer Part Number: REZ-F903XB-2
  • Brand: Rezo
Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 S Bandit 96-04

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 S Bandit 96-04

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 S Bandit 96-04. Rezo High Performance Brake Discs. Rezo stainless steel fully floating front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves. Type: Wavy (Contour) Outer Diameter: 290mm Inner Diameter: 64mm Thickness: 5mm Number of Holes: 5 Hole Diameter: 10.5mm Pitch: 86mm Total Height: 19.5mm Disc Type: Fully Floating Hub Colour: Black Weight: 1,210 Grams Each Turning Direction: Universal left or right Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc. The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking. High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low quality discs. Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements. All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units. When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications. Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time. New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs. Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc. We recommend fitting sintered brake pads for the front to give the best braking experience. Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue. A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. We stock a lot of parts in our UK warehouse ready for immediate dispatch but for some larger items such as tyres it is only possible to keep the more popular sizes in stock with the less common tyres incurring a delay in dispatch. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. Thank you for shopping at Motorcycle Parts Warehouse. How do I cancel an order? You have 30 calendar days to return an item from the date you receive it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging. This covers manufacturing faults only and excludes damage caused by the user, misuse or wear and tear. This does not exclude your statutory rights. What if I have bought the wrong size, colour or product? The item must be unused and still in its original packaging with tags. You will be responsible for the costs in returning the goods and ensuring that the goods are packaged safely. What if there is a fault with the product I received? What if I do not like the product I have received? You do have a legal obligation to take good care of the products while they are in your possession and we can only accept items for return if they are unused and have all original tags and packaging. However, if the return is due to the wrong item being ordered or a change of mind etc. Do I need to include anything when sending items back? Welcome to Motorcycle Parts Warehouse, your number one resource for motorcycle parts, motorcycle clothing and motorcycle accessories. We supply OEM parts, aftermarket parts and performance parts for a wide range of motorcycle and scooter models, and stock massive selection motorbike clothing with products from all the top brands. We understand the motorcycle market and work hard to bring you the latest in design and innovation. The majority of our products are sourced directly from manufacturers in the UK and around the World meaning we can offer you competitive prices without compromising on quality. Here at MPW we strive to bring you the very best in both products and service, providing you with a huge selection of motorcycle and scooter parts to choose from and customer service which is second to none. MPW is the best place to shop for all your biking needs. Powered by SixBit’s eCommerce Solution. The item “Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 600 S Bandit 96-04″ is in sale since Thursday, June 7, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “m-p-w” and is located in Brighton. This item can be shipped to all countries in Europe.
  • Manufacturer Part Number: REZ-F903XB-2
  • Brand: Rezo
Stainless Steel Front Brake Disc Set For Suzuki GSX 1200 INAZUMA 99-02 99 00 01

Stainless Steel Front Brake Disc Set For Suzuki GSX 1200 INAZUMA 99-02 99 00 01

Stainless Steel Front Brake Disc Set For Suzuki GSX 1200 INAZUMA 99-02 99 00 01

Stainless Steel Front Brake Disc Set For Suzuki GSX 1200 INAZUMA 99-02 99 00 01. FRONT Brake Disc Rotor. This aftermarket Brake Disc Rotor is made by our company. We have recently been given merits for the laser cutting technology, rotor cooling technique and using most durable materials. We’ve tried those rotors on the road & track and to be honest, they worked better than we thought they would. Its technology allows expansion and contraction of the rotor and carrier when braking, therefore providing much better braking response, feedback, reduced drag & heat, full pad contact and always perfectly aligned. Generally 15%-20% lighter than OEM brake rotor. Made of Low-carbon high grade stainless steel (SU420 J2). Designed by CAD/CAM system. Hi-end laser cut technology, heat resistant test. Expandable & contactable, offer great friction during brake. Condition: 100% Brand New. All manuals, registration cards and accessories must be included. France, Germany, Italy, Spain, Eastern Europe, South America & other countries need around 2-4 weeks. The item “Stainless Steel Front Brake Disc Set For Suzuki GSX 1200 INAZUMA 99-02 99 00 01″ is in sale since Tuesday, October 31, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “ilevers” and is located in Hong Kong. This item can be shipped worldwide.
  • Brand: MC Motoparts
  • Manufacturer Part Number: MC-ZC-I-02-2-04-PN
  • Unit Type: Stainless Steel Front Floating Brake Disc Rotor
  • Bike Brand: SUZUKI
  • Bike Model: GSX 1200 INAZUMA
  • Bike Year: 1999-2002
  • QTY (pc./set): 2 pcs
  • Holes Diameter: 10.5MM
  • Inside Diameter: 64MM
  • No. Of Holes: 5
  • Offset: 19.5MM
  • Outer Diameter: 310MM
  • Thickness: 5MM
  • Placement on Vehicle: Front
  • Type: Stainless Steel Front Floating Brake Disc Rotor
Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 Bandit 95-05

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 Bandit 95-05

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 Bandit 95-05. Rezo High Performance Brake Discs. Rezo stainless steel fully floating front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves. Type: Wavy (Contour) Outer Diameter: 310mm Inner Diameter: 64mm Thickness: 5mm Number of Holes: 5 Hole Diameter: 10.5mm Pitch: 86mm Total Height: 19.5mm Disc Type: Fully Floating Hub Colour: Black Weight: 1,480 Grams Each Turning Direction: Universal left or right Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc. The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking. High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low quality discs. Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements. All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units. When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications. Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time. New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs. Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc. We recommend fitting sintered brake pads for the front to give the best braking experience. Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue. A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. We stock a lot of parts in our UK warehouse ready for immediate dispatch but for some larger items such as tyres it is only possible to keep the more popular sizes in stock with the less common tyres incurring a delay in dispatch. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. Thank you for shopping at Motorcycle Parts Warehouse. How do I cancel an order? You have 30 calendar days to return an item from the date you receive it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging. This covers manufacturing faults only and excludes damage caused by the user, misuse or wear and tear. This does not exclude your statutory rights. What if I have bought the wrong size, colour or product? The item must be unused and still in its original packaging with tags. You will be responsible for the costs in returning the goods and ensuring that the goods are packaged safely. What if there is a fault with the product I received? What if I do not like the product I have received? You do have a legal obligation to take good care of the products while they are in your possession and we can only accept items for return if they are unused and have all original tags and packaging. However, if the return is due to the wrong item being ordered or a change of mind etc. Do I need to include anything when sending items back? Welcome to Motorcycle Parts Warehouse, your number one resource for motorcycle parts, motorcycle clothing and motorcycle accessories. We supply OEM parts, aftermarket parts and performance parts for a wide range of motorcycle and scooter models, and stock massive selection motorbike clothing with products from all the top brands. We understand the motorcycle market and work hard to bring you the latest in design and innovation. The majority of our products are sourced directly from manufacturers in the UK and around the World meaning we can offer you competitive prices without compromising on quality. Here at MPW we strive to bring you the very best in both products and service, providing you with a huge selection of motorcycle and scooter parts to choose from and customer service which is second to none. MPW is the best place to shop for all your biking needs. Powered by SixBit’s eCommerce Solution. The item “Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 Bandit 95-05″ is in sale since Thursday, June 7, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “m-p-w” and is located in Brighton. This item can be shipped to all countries in Europe.
  • Manufacturer Part Number: REZ-F902XB-2
  • Brand: Rezo
Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 S Bandit 95-05

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 S Bandit 95-05

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 S Bandit 95-05. Rezo High Performance Brake Discs. Rezo stainless steel fully floating front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves. Type: Wavy (Contour) Outer Diameter: 310mm Inner Diameter: 64mm Thickness: 5mm Number of Holes: 5 Hole Diameter: 10.5mm Pitch: 86mm Total Height: 19.5mm Disc Type: Fully Floating Hub Colour: Black Weight: 1,480 Grams Each Turning Direction: Universal left or right Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc. The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking. High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low quality discs. Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements. All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units. When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications. Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time. New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs. Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc. We recommend fitting sintered brake pads for the front to give the best braking experience. Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue. A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. We stock a lot of parts in our UK warehouse ready for immediate dispatch but for some larger items such as tyres it is only possible to keep the more popular sizes in stock with the less common tyres incurring a delay in dispatch. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. Thank you for shopping at Motorcycle Parts Warehouse. How do I cancel an order? You have 30 calendar days to return an item from the date you receive it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging. This covers manufacturing faults only and excludes damage caused by the user, misuse or wear and tear. This does not exclude your statutory rights. What if I have bought the wrong size, colour or product? The item must be unused and still in its original packaging with tags. You will be responsible for the costs in returning the goods and ensuring that the goods are packaged safely. What if there is a fault with the product I received? What if I do not like the product I have received? You do have a legal obligation to take good care of the products while they are in your possession and we can only accept items for return if they are unused and have all original tags and packaging. However, if the return is due to the wrong item being ordered or a change of mind etc. Do I need to include anything when sending items back? Welcome to Motorcycle Parts Warehouse, your number one resource for motorcycle parts, motorcycle clothing and motorcycle accessories. We supply OEM parts, aftermarket parts and performance parts for a wide range of motorcycle and scooter models, and stock massive selection motorbike clothing with products from all the top brands. We understand the motorcycle market and work hard to bring you the latest in design and innovation. The majority of our products are sourced directly from manufacturers in the UK and around the World meaning we can offer you competitive prices without compromising on quality. Here at MPW we strive to bring you the very best in both products and service, providing you with a huge selection of motorcycle and scooter parts to choose from and customer service which is second to none. MPW is the best place to shop for all your biking needs. Powered by SixBit’s eCommerce Solution. The item “Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1200 S Bandit 95-05″ is in sale since Thursday, June 7, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “m-p-w” and is located in Brighton. This item can be shipped to all countries in Europe.
  • Manufacturer Part Number: REZ-F902XB-2
  • Brand: Rezo
Stainless Steel Front Brake Disc Set For Suzuki GSF 600 BANDIT S 95-99 95 96 97

Stainless Steel Front Brake Disc Set For Suzuki GSF 600 BANDIT S 95-99 95 96 97

Stainless Steel Front Brake Disc Set For Suzuki GSF 600 BANDIT S 95-99 95 96 97

Stainless Steel Front Brake Disc Set For Suzuki GSF 600 BANDIT S 95-99 95 96 97. FRONT Brake Disc Rotor. This aftermarket Brake Disc Rotor is made by our company. We have recently been given merits for the laser cutting technology, rotor cooling technique and using most durable materials. We’ve tried those rotors on the road & track and to be honest, they worked better than we thought they would. Its technology allows expansion and contraction of the rotor and carrier when braking, therefore providing much better braking response, feedback, reduced drag & heat, full pad contact and always perfectly aligned. Generally 15%-20% lighter than OEM brake rotor. Made of Low-carbon high grade stainless steel (SU420 J2). Designed by CAD/CAM system. Hi-end laser cut technology, heat resistant test. Expandable & contactable, offer great friction during brake. Condition: 100% Brand New. All manuals, registration cards and accessories must be included. France, Germany, Italy, Spain, Eastern Europe, South America & other countries need around 2-4 weeks. The item “Stainless Steel Front Brake Disc Set For Suzuki GSF 600 BANDIT S 95-99 95 96 97″ is in sale since Tuesday, October 31, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “ilevers” and is located in Hong Kong. This item can be shipped worldwide.
  • Brand: MC Motoparts
  • Manufacturer Part Number: MC-ZC-I-03-2-01-PN
  • Unit Type: Stainless Steel Front Floating Brake Disc Rotor
  • Bike Brand: SUZUKI
  • Bike Model: GSF 600 BANDIT / S
  • Bike Year: 1995-1999
  • QTY (pc./set): 2 pcs
  • Holes Diameter: 10.5MM
  • Inside Diameter: 64MM
  • No. Of Holes: 5
  • Offset: 19.5MM
  • Outer Diameter: 290MM
  • Thickness: 5MM
  • Placement on Vehicle: Front
  • Type: Stainless Steel Front Floating Brake Disc Rotor
HEL Suzuki GSF1200 K1 K5 Bandit 2001 05 Braided Stainless Brake Clutch Line Hose

HEL Performance Braided Brake Line kit as selected. Stainless Steel Fittings / bolts with copper washers included. HEL Suzuki GSF1200 K1 – K5 Bandit 2001 – 2005 Braided Stainless Brake Clutch Line Hose. Suitable ONLY for the Bike listed – all brake lines are bike specific by year or model and rarely share the same banjos – bolt threads or length between similar models. Make sure you know what MODEL you have, almost every bike has more than one variation. X – RR – R – S – F – G – GS – EN – KL etc… Not registration year, or V5 year they are NOT relevant. IF YOU HAVE BAR RISERS – FORKS OR CALIPERS FROM A DIFFERENT BIKE – RENTHAL BARS. UPGRADED BREMBO MASTERCYLINDER OR BIG BRAKE CONVERSIONS PLEASE. TELL US AT THE TIME OF ORDER, USING THE NOTES SECTION AT CHECKOUT and you tell us how long you want it… Our hoses are made to order for YOU so we don’t mind helping and modifying a specification with extra length, but we need to know before building it. If you ask us to make a bespoke line to your needs it is no longer refundable or returnable. Whilst we do stock colour banjos if you request them your line is bespoke and no longer returnable. Other fittings are NOT available in colour, they are only made in stainless. Here is what HEL says about these lines. Teflon PTFE Inner Hose / Stainless Steel Outer Braid / Protective PVC Cover. Fittings & Ferrules Material. 70°C to 260°C (-158°F to 500°F). 4250 PSI (293 Bar). 12750 PSI (879 Bar). Brakes, Clutch, Fuel, Oil, Water & Air. FMVSS 106, TUV, DEKRA, DOT, ADR, NHTSA and SAE. The item “HEL Suzuki GSF1200 K1 K5 Bandit 2001 05 Braided Stainless Brake Clutch Line Hose” is in sale since Wednesday, January 31, 2018. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “dinxracing” and is located in UK. This item can be shipped to United Kingdom.
  • Manufacturer Part Number: HBF7621 / HBF7622 / HBC7621
  • Part Type: Brakes & Brake Parts
  • Brand: HEL
  • Model: Suzuki GSF1200 K1 K5 Bandit 2001 05
  • Country/Region of Manufacture: United Kingdom
  • Product Type: Brake Line/Hose
Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1250 S Bandit ABS 07-15

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1250 S Bandit ABS 07-15

Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1250 S Bandit ABS 07-15. Rezo High Performance Brake Discs. Rezo stainless steel fully floating front brake discs are manufactured from a combination of high grade (420) stainless steel and aircraft aluminium, precision manufactured using CNC laser cutting with dual diamond ground surfaces for flatness giving your bike the high performance braking power that it deserves. Type: Wavy (Contour) Outer Diameter: 310mm Inner Diameter: 121.5mm Thickness: 5mm Number of Holes: 5 Hole Diameter: 10.5mm Pitch: 142mm Total Height: 5.5mm Disc Type: Fully Floating Hub Colour: Black >b>Weight: 1,430 Grams Each Turning Direction: Universal left or right Note: Rezo discs are supplied in the correct quantity for the bike listed, meaning if your bike has 2 front discs you will receive 2 discs, if it has 1 disc you will receive 1 disc. The braking area is made from heat treated 420 stainless steel with excellent corrosion resistance properties and high temperature (Heat-cycle) durability, both surfaces are diamond ground to produce a parallel fat surface, with a CNC laser cut slotted design and wavy pattern to give improved cooling for more effective breaking. High strength stainless steel rotor buttons help keep the rotor in perfect contact with the brake pads, also fitted with pre-loaded compression washers to reduce chatter and vibration, which is normally found on cheaper low quality discs. Made from 7075-T6 aircraft grade aluminium for strength and weight saving. They’re also anodized in black to give a simple clean look offering good corrosion resistance to the elements. All Rezo brake discs are made to OEM specifications with the same diameter, offset and fitting points making them a direct replacement for your old units. When installing your new Rezo brake discs – you will need to offset the rotor buttons so they are not mirrored left to right and if possible, we recommend fitting new disc bolts which should be tightened to OEM factory torque specifications. Breaking your new discs in – will take some time; you should especially bare this in mind the first time you ride your bike after fitting. Rezo discs usually take 100 miles to break in and you will notice them getting better the more you use them. Breaking them in should be done with gradual breaking at various speeds over time. New Brake Pads – must be fitted when installing your new Rezo discs, this is to allow the new braking surface to bed in correctly giving you a much smoother feel under braking, we recommend fitting a sintered brake pad for the front to get the most from your new discs. Failure to replace your old pads can result in improper bedding in and may lead to heat spots and warping of the disc. We recommend fitting sintered brake pads for the front to give the best braking experience. Before fitting new pads – make sure the brake caliper pistons and any slider pins are free and working correctly, if they are stiff or seized they will need to be cleaned or replaced before you continue. A caliper that is seized or not working correctly can result in the pads not retracting from the disc, causing an excess of heat to build which cannot be dispersed in the necessary time, leading to disc warping. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. We stock a lot of parts in our UK warehouse ready for immediate dispatch but for some larger items such as tyres it is only possible to keep the more popular sizes in stock with the less common tyres incurring a delay in dispatch. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. Thank you for shopping at Motorcycle Parts Warehouse. How do I cancel an order? You have 30 calendar days to return an item from the date you receive it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging. This covers manufacturing faults only and excludes damage caused by the user, misuse or wear and tear. This does not exclude your statutory rights. What if I have bought the wrong size, colour or product? The item must be unused and still in its original packaging with tags. You will be responsible for the costs in returning the goods and ensuring that the goods are packaged safely. What if there is a fault with the product I received? What if I do not like the product I have received? You do have a legal obligation to take good care of the products while they are in your possession and we can only accept items for return if they are unused and have all original tags and packaging. However, if the return is due to the wrong item being ordered or a change of mind etc. Do I need to include anything when sending items back? Welcome to Motorcycle Parts Warehouse, your number one resource for motorcycle parts, motorcycle clothing and motorcycle accessories. We supply OEM parts, aftermarket parts and performance parts for a wide range of motorcycle and scooter models, and stock massive selection motorbike clothing with products from all the top brands. We understand the motorcycle market and work hard to bring you the latest in design and innovation. The majority of our products are sourced directly from manufacturers in the UK and around the World meaning we can offer you competitive prices without compromising on quality. Here at MPW we strive to bring you the very best in both products and service, providing you with a huge selection of motorcycle and scooter parts to choose from and customer service which is second to none. MPW is the best place to shop for all your biking needs. Powered by SixBit’s eCommerce Solution. The item “Rezo Wavy Stainless Front Brake Disc Pair For Suzuki GSF 1250 S Bandit ABS 07-15″ is in sale since Tuesday, November 21, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “m-p-w” and is located in Brighton. This item can be shipped to all countries in Europe.
  • Manufacturer Part Number: REZ-F904XB-2
  • Brand: Rezo
EBC Front Brake Disc X Series Stainless Steel Suzuki GSF 600 S Bandit 2003

Brake Disc EBC X Series Stainless Steel. Use our advanced search and be sure to find the exact fit.. No product reviews yet. Please be aware that the fitment in the item title is accurate, it is just a case of the compatibility table not being fully updated yet. EBC X / XC Series – Full floating discs for the front wheel. These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides. The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased. The weight of the new series “X” and “XC” is reduced by a further 5-10% due to the 6-riveting system with a light-weight inner ring, which in turn means an improvement over conventional brake discs. The new brake discs are equipped with the unique and patented SD system from EBC, whose square rivets in the recesses of the brake disc under the heat generated during braking allow an unrestricted expansion of the outer and inner ring without affecting the rivet connection. Such an impairment occurs when the brake disk is heated by strong braking and the outer ring contacts the (usually round) rivets that separate the outer ring from the inner ring. With the new EBC system, this problem is avoided, which causes 100% of the brake disc defects caused by warping of the disc and vibrations. What is the SD system? This is the new four-cornered riveting system from EBC. This system completely prevents distortion of the brake disc, increases the life of the brake disc, and improves the braking performance. This product has no reviews yet, however see what our buyers say about our other products.. We recommend you do not book your vehicle in for any repairs/MOT until you physically have parts to save on any disappointment caused by delays. Brooks Barn will be under no liability for any costs, damages or expenses caused by any delays. Premium Listings Only – same day dispatch if ordered before 3pm Monday-Friday. Orders placed on the weekend should be dispatched no later than Tuesday. For all other orders sent using 24hour courier you will be e-mailed the tracking information to follow your order on-line. A signature will be required. If you wont be home to sign for the item please check the on-line tracking, most couriers will attempt 3 deliveries before returning it, some will take it to a local post office for collection. However, delays are occasionally inevitable due to unforeseen circumstances. We hold trust that our selected Couriers will Deliver Your Parcel Safely. Faulty/Incorrect Item – If the item is faulty/incorrect we will arrange to have the item collected from you free of charge (weekdays only). Premium Listings Only – same day dispatch if ordered before 3pm Monday- Friday. The item “EBC Front Brake Disc X Series Stainless Steel Suzuki GSF 600 S Bandit 2003″ is in sale since Friday, October 27, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “brooksbarnparts” and is located in Crymych, Pembrokeshire. This item can be shipped worldwide.
  • Brand: EBC
  • Manufacturer Part Number: MD3003X
  • Type: Floating
  • Material: Stainless Steel
  • Inner Diameter: 64.2 mm
  • Number of Bolts: 5
  • Bolt Hole Diameter: 10.5 mm
  • Thickness: 4.7 mm
  • Offset: 19 mm
  • PCD: 86 mm
  • Outer Diameter: 290 mm
  • Intended Use: Replacement Part
EBC Front Brake Disc X Series Stainless Steel Suzuki GSF 650 A Bandit ABS 2010

Brake Disc EBC X Series Stainless Steel. Use our advanced search and be sure to find the exact fit.. No product reviews yet. Please be aware that the fitment in the item title is accurate, it is just a case of the compatibility table not being fully updated yet. EBC X / XC Series – Full floating discs for the front wheel. These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides. The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased. The weight of the new series” X” and” XC” is reduced by a further 5-10% due to the 6-riveting system with a lightweight inner ring, which in turn means an improvement over conventional brake discs. The new brake discs are equipped with the unique and patented SD system from EBC, whose square rivets in the recesses of the brake disc, under the heat generated during braking, allow unrestricted stretching of the outer and inner rings without affecting the rivet connection. Such an impairment occurs when the brake disk is heated by strong braking and the outer ring contacts the (usually round) rivets that separate the outer ring from the inner ring. With the new EBC system, this problem is avoided, which causes 100% of the brake disc defects caused by warping of the disc and vibrations. What is the SD system? This is the new four-cornered riveting system from EBC. This system completely prevents distortion of the brake disc, increases the life of the brake disc, and improves the braking performance. This product has no reviews yet, however see what our buyers say about our other products.. We recommend you do not book your vehicle in for any repairs/MOT until you physically have parts to save on any disappointment caused by delays. Brooks Barn will be under no liability for any costs, damages or expenses caused by any delays. Premium Listings Only – same day dispatch if ordered before 3pm Monday-Friday. Orders placed on the weekend should be dispatched no later than Tuesday. For all other orders sent using 24hour courier you will be e-mailed the tracking information to follow your order on-line. A signature will be required. If you wont be home to sign for the item please check the on-line tracking, most couriers will attempt 3 deliveries before returning it, some will take it to a local post office for collection. However, delays are occasionally inevitable due to unforeseen circumstances. We hold trust that our selected Couriers will Deliver Your Parcel Safely. Faulty/Incorrect Item – If the item is faulty/incorrect we will arrange to have the item collected from you free of charge (weekdays only). Premium Listings Only – same day dispatch if ordered before 3pm Monday- Friday. The item “EBC Front Brake Disc X Series Stainless Steel Suzuki GSF 650 A Bandit ABS 2010″ is in sale since Wednesday, October 25, 2017. This item is in the category “Vehicle Parts & Accessories\Motorcycle Tuning & Styling”. The seller is “brooksbarnparts” and is located in Crymych, Pembrokeshire. This item can be shipped worldwide.
  • Brand: EBC
  • Manufacturer Part Number: MD3092X
  • Type: Floating
  • Material: Stainless Steel
  • Inner Diameter: 121.3 mm
  • Number of Bolts: 5
  • Bolt Hole Diameter: 10.5 mm
  • Thickness: 5 mm
  • PCD: 142 mm
  • Outer Diameter: 310 mm
  • Intended Use: Replacement Part