Bandit Front Brakes

Genuine Kawasaki ER6 Tokico (OEM) fully refurbished front brake calipers. Came from a very low mileage ER6. They are common fitment calipers, so will fit other models also (GSF600 Mark 2, GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers). Also fits some other Kawasakis (GPZ1100, ER6F, Vulcan VN1600, again, please check on a Kawasaki forum). The Kawsaki fitments have smaller 27mm pistons and longer caliper bracket mounting bolts, but the bodies and mounting brackets are identical. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also, with clean crisp machined edges. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Com plete with the original Kawasaki pads which have been professionally cleaned and refitted because they are great for a few thousand miles more. I think mine are priced reasonably well, for the work and expense that have gone into them. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “KAWASAKI ER6 SV650 DL SUZUKI BANDIT FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Saturday, March 2, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.

• Brand: Tokico
• Non-Domestic Product: No
• Custom Bundle: No
• Modified Item: No
• Country/Region of Manufacture: Japan
• Unit Quantity: 1

Genuine Kawasaki ER6 Tokico (OEM) fully refurbished front brake calipers. Came from a very low mileage ER6. They are common fitment calipers, so will fit other models also (GSF600 Mark 2, GSXF750, SV650 and others, but best to check for yourself on one of the Suzuki forums or check the photos carefully against your existing calipers). Also fits some other Kawasakis (GPZ1100, ER6F, Vulcan VN1600, again, please check on a Kawasaki forum). The Kawsaki fitments have smaller 27mm pistons and longer caliper bracket mounting bolts, but the bodies and mounting brackets are identical. Fully stripped and cleaned. Pistons are in superb condition and have been polished. Bodies are excellent also, with clean crisp machined edges. New stainless steel banjo bolts and copper washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the new seals and the pistons. Com plete with the original Kawasaki pads which have been professionally cleaned and refitted because they are great for a few thousand miles more. I think mine are priced reasonably well, for the work and expense that have gone into them. Note: My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “KAWASAKI ER6 SV650 DL SUZUKI BANDIT FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Wednesday, February 20, 2019. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.

• Brand: Tokico
• Non-Domestic Product: No
• Custom Bundle: No
• Modified Item: No
• Country/Region of Manufacture: Japan
• Unit Quantity: 1