EBC Front Brake Disc X Series Stainless Steel For Suzuki GSF 600 U Bandit 2001

Brake Disc EBC X Series Stainless Steel. Use our advanced search and be sure to find the exact fit.. No product reviews yet. Please be aware that the fitment in the item title is accurate, it is just a case of the compatibility table not being fully updated yet. EBC X / XC Series – Full floating discs for the front wheel. These brake discs replace many of the LS (left) / RS (right) brake discs and can be installed on both sides. The steel used for the new EBC brake discs is a special stainless steel compound with a higher friction effect than that of conventional heat-treated stainless steel brake discs. With the 10% improvement in the friction effect, the braking force is further increased. The weight of the new series “X” and “XC” is reduced by a further 5-10% due to the 6-riveting system with a light-weight inner ring, which in turn means an improvement over conventional brake discs. The new brake discs are equipped with the unique and patented SD system from EBC, whose square rivets in the recesses of the brake disc under the heat generated during braking allow an unrestricted expansion of the outer and inner ring without affecting the rivet connection. Such an impairment occurs when the brake disk is heated by strong braking and the outer ring contacts the (usually round) rivets that separate the outer ring from the inner ring. With the new EBC system, this problem is avoided, which causes 100% of the brake disc defects caused by warping of the disc and vibrations. What is the SD system? This is the new four-cornered riveting system from EBC. This system completely prevents distortion of the brake disc, increases the life of the brake disc, and improves the braking performance. This product has no reviews yet, however see what our buyers say about our other products.. We recommend you do not book your vehicle in for any repairs/MOT until you physically have parts to save on any disappointment caused by delays. Brooks Barn will be under no liability for any costs, damages or expenses caused by any delays. Premium Listings Only – same day dispatch if ordered before 3pm Monday- Friday. For all other orders sent using 24hour courier you will be e-mailed the tracking information to follow your order on-line. A signature will be required. If you wont be home to sign for the item please check the on-line tracking, most couriers will attempt 3 deliveries before returning it, some will take it to a local post office for collection. However, delays are occasionally inevitable due to unforeseen circumstances. We hold trust that our selected Couriers will Deliver Your Parcel Safely. Faulty/Incorrect Item – If the item is faulty/incorrect we will arrange to have the item collected from you free of charge (weekdays only). The item “EBC Front Brake Disc X Series Stainless Steel For Suzuki GSF 600 U Bandit 2001″ is in sale since Wednesday, January 29, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “brooksbarnparts” and is located in Crymych, Pembrokeshire. This item can be shipped worldwide.
  • Brand: EBC
  • Manufacturer Part Number: MD3003X
  • Intended Use: Replacement Part
  • Bolt Hole Diameter: 10.5 mm
  • Inner Diameter: 64.2 mm
  • Material: Stainless Steel
  • Number of Bolts: 5
  • Offset: 19 mm
  • Outer Diameter: 290 mm
  • PCD: 86 mm
  • Thickness: 4.7 mm
  • Type: Floating
GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair

REZO HIGH PERFORMANCE BRAKE DISCS Rezo stainless steel fully floating front brake discs are manufactured using high grade (420) stainless steel and aircraft grade aluminium. The discs are cut using a CNC controlled laser and finished with dual diamond grinders to ensure true flatness and high braking performance. Specifications – Type: Fully floating – Outer Diameter: 310mm – Inner Diameter: 64mm – Thickness: 5mm – Wear limit: 4mm – Mounting holes: 5 – Mounting hole diameter: 10.5mm – PCD (pitch circle diameter): 85mm – Height (carrier/disc offset): 19.5mm – Weight: 1510 Grams – Turning Direction: Universal left or right. Product Info The disc friction surface is made from heat treated 420 stainless steel with excellent corrosion resistance and high heat-cycle durability. The surfaces are diamond ground to produce a true parallel and flat surface. The disc is slotted for improved water, dust and gas dispersion and improved cooling, and is contoured with a wavy pattern for enhanced looks and to reduce rotational inertia and unsprung weight. High strength stainless steel buttons allow the disc to float on the hub/carrier for improved heat control, and pre-loaded compression washers in the buttons minimise the chatter and vibration that occurs with standard buttons. The hub/carrier is made from 7075-T6 aircraft grade aluminium for strength and lightness. It is anodized black to give a simple clean look and good corrosion resistance. All Rezo brake discs are manufactured to OEM specifications and are a direct replacement for your original discs. Use new disc bolts and tighten them to the OEM factory torque specification. Clean each brake caliper and check it functions correctly. A seized piston or slider pin will cause braking problems and could damage the new disc. New brake pads must be fitted with your new Rezo discs. This is to allow the new braking surfaces to bed in correctly, maximising performance and giving you a much smoother feel. We recommend using sintered brake pads for the best performance. Failure to replace your old pads can result in improper bedding in and impaired braking performance, and in worst cases could cause heat spots and warping. Bedding in your new discs and pads takes time and braking performance is reduced until it is complete. New discs and pads usually take around 100 miles to bed in. Initial bedding in should ideally be done with gradual braking at various speeds, with increasing pressure and load applied over time. You will notice performance improve steadily. If a disc fails we will replace it. Thank you for purchasing from MPW. If your item is no longer needed or you’re just not happy with it? For international customers, you have the option of using the carrier of your choice to return your order to us. Below is some information on our process. You have two pathways when exchanging an item with us. The second option may result in a quicker turnaround for you, however, you will have a period of time where the funds from both orders have left your account. Order Cancellation / Modifications. If you change your mind, get in touch as soon as possible! Used or Damaged Merchandise. Any liquid or aerosol that has been opened or seal broken is non-returnable. If you’ve owned and used your product but it is within the 30-day return period we may still be able to help. If any items on your order arrive damaged, let us know ASAP. We will assist our customers in these claims but ask that you are patient as this process can take a little time. Our return address is provided below. Please keep a record of your return tracking information as we will not be held responsible for packages lost in transit on route back to us. EU International Orders: As of 1 January 2021, the UK is no longer in the European Union. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Any orders placed for the items in these areas will incur an additional charge. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). The same as Zone C but with items incurring a greater charge. Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. The item “GSF1200 RF900 Rezo Wavy Stainless Front Brake Discs Pair” is in sale since Tuesday, September 28, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “motorcycle-parts-warehouse” and is located in Southwick. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Viet nam, Russian federation.
  • Brand: REZO
  • Manufacturer Part Number: REZ-F902XB-2
  • Item Condition: New
  • Type: Floating
  • Colour: Black
  • Material: Stainless Steel
  • MPN: REZ-F902XB-2
DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair

REZO HIGH PERFORMANCE BRAKE DISCS Rezo stainless steel fully floating front brake discs are manufactured using high grade (420) stainless steel and aircraft grade aluminium. The discs are cut using a CNC controlled laser and finished with dual diamond grinders to ensure true flatness and high braking performance. Specifications – Type: Floating wavy – Outer Diameter: 310mm – Inner Diameter: 121.5mm – Thickness: 5mm – Wear limit: 4mm – Mounting holes: 5 – Mounting hole diameter: 10mm – PCD (pitch circle diameter): 142mm – Height (carrier/disc offset): 0mm – Weight: 1480 Grams – Turning Direction: Universal left or right. Product Info The disc friction surface is made from heat treated 420 stainless steel with excellent corrosion resistance and high heat-cycle durability. The surfaces are diamond ground to produce a true parallel and flat surface. The disc is slotted for improved water, dust and gas dispersion and improved cooling, and is contoured with a wavy pattern for enhanced looks and to reduce rotational inertia and unsprung weight. High strength stainless steel buttons allow the disc to float on the hub/carrier for improved heat control, and pre-loaded compression washers in the buttons minimise the chatter and vibration that occurs with standard buttons. The hub/carrier is made from 7075-T6 aircraft grade aluminium for strength and lightness. It is anodized black to give a simple clean look and good corrosion resistance. All Rezo brake discs are manufactured to OEM specifications and are a direct replacement for your original discs. Use new disc bolts and tighten them to the OEM factory torque specification. Clean each brake caliper and check it functions correctly. A seized piston or slider pin will cause braking problems and could damage the new disc. New brake pads must be fitted with your new Rezo discs. This is to allow the new braking surfaces to bed in correctly, maximising performance and giving you a much smoother feel. We recommend using sintered brake pads for the best performance. Failure to replace your old pads can result in improper bedding in and impaired braking performance, and in worst cases could cause heat spots and warping. Bedding in your new discs and pads takes time and braking performance is reduced until it is complete. New discs and pads usually take around 100 miles to bed in. Initial bedding in should ideally be done with gradual braking at various speeds, with increasing pressure and load applied over time. You will notice performance improve steadily. If a disc fails we will replace it. Thank you for purchasing from MPW. If your item is no longer needed or you’re just not happy with it? For international customers, you have the option of using the carrier of your choice to return your order to us. Below is some information on our process. You have two pathways when exchanging an item with us. The second option may result in a quicker turnaround for you, however, you will have a period of time where the funds from both orders have left your account. Order Cancellation / Modifications. If you change your mind, get in touch as soon as possible! Used or Damaged Merchandise. Any liquid or aerosol that has been opened or seal broken is non-returnable. If you’ve owned and used your product but it is within the 30-day return period we may still be able to help. If any items on your order arrive damaged, let us know ASAP. We will assist our customers in these claims but ask that you are patient as this process can take a little time. Our return address is provided below. Please keep a record of your return tracking information as we will not be held responsible for packages lost in transit on route back to us. EU International Orders: As of 1 January 2021, the UK is no longer in the European Union. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Any orders placed for the items in these areas will incur an additional charge. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). The same as Zone C but with items incurring a greater charge. Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. The item “DL GSF GSR GSX Models Rezo Wavy Stainless Front Brake Discs Pair” is in sale since Tuesday, September 21, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “motorcycle-parts-warehouse” and is located in Southwick. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Viet nam, Russian federation.
  • Brand: REZO
  • Manufacturer Part Number: REZ-F904XB-2
  • Item Condition: New
  • Type: Floating
  • Colour: Black
  • Material: Stainless Steel
  • MPN: REZ-F904XB-2
Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

Suzuki Gsf 1250 Fa Abs Bandit 2010- Front Stainless Braided Brake Kit

SUZUKI GSF 1250 FA ABS BANDIT 2010- FRONT STAINLESS BRAKE LINE KIT. SUZUKI GSF 1250 FA ABS BANDIT 2010. Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 1250 FA ABS BANDIT 2010- FRONT STAINLESS BRAIDED BRAKE KIT” is in sale since Sunday, October 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 1250 FA ABS BANDIT 2010-
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime
Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front Stainless Braided Brake Kit

Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 1200 ABS BANDIT 1996-2000 FRONT STAINLESS BRAIDED BRAKE KIT” is in sale since Sunday, October 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 1200 ABS BANDIT 1996-2000
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime
Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Suzuki Gsf 1200 Abs Bandit 1996-2000 Front & Rear Stainless Braided Brake Kit

Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 1200 ABS BANDIT 1996-2000 FRONT & REAR STAINLESS BRAIDED BRAKE KIT” is in sale since Sunday, October 18, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 1200 ABS BANDIT 1996-2000
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime
Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04

Rezo Front Brake Wavy Stainless Rotor Discs Pair – Suzuki GSF 600 S Bandit 96-04. REZO HIGH PERFORMANCE BRAKE DISCS Rezo stainless steel fully floating front brake discs are manufactured using high grade (420) stainless steel and aircraft grade aluminium. The discs are cut using a CNC controlled laser and finished with dual diamond grinders to ensure true flatness and high braking performance. Specifications – Type: Floating wavy – Outer Diameter: 290mm – Inner Diameter: 64mm – Thickness: 5mm – Wear limit: 4mm – Mounting holes: 5 – Mounting hole diameter: 10mm – PCD (pitch circle diameter): 86mm – Height (carrier/disc offset): 19.5mm – Weight: 1222 Grams – Turning Direction: Universal left or right. Product Info The disc friction surface is made from heat treated 420 stainless steel with excellent corrosion resistance and high heat-cycle durability. The surfaces are diamond ground to produce a true parallel and flat surface. The disc is slotted for improved water, dust and gas dispersion and improved cooling, and is contoured with a wavy pattern for enhanced looks and to reduce rotational inertia and unsprung weight. High strength stainless steel buttons allow the disc to float on the hub/carrier for improved heat control, and pre-loaded compression washers in the buttons minimise the chatter and vibration that occurs with standard buttons. The hub/carrier is made from 7075-T6 aircraft grade aluminium for strength and lightness. It is anodized black to give a simple clean look and good corrosion resistance. All Rezo brake discs are manufactured to OEM specifications and are a direct replacement for your original discs. Use new disc bolts and tighten them to the OEM factory torque specification. Clean each brake caliper and check it functions correctly. A seized piston or slider pin will cause braking problems and could damage the new disc. New brake pads must be fitted with your new Rezo discs. This is to allow the new braking surfaces to bed in correctly, maximising performance and giving you a much smoother feel. We recommend using sintered brake pads for the best performance. Failure to replace your old pads can result in improper bedding in and impaired braking performance, and in worst cases could cause heat spots and warping. Bedding in your new discs and pads takes time and braking performance is reduced until it is complete. New discs and pads usually take around 100 miles to bed in. Initial bedding in should ideally be done with gradual braking at various speeds, with increasing pressure and load applied over time. You will notice performance improve steadily. If a disc fails we will replace it. Thank you for purchasing from MPW. If your item is no longer needed or you’re just not happy with it? For international customers, you have the option of using the carrier of your choice to return your order to us. Below is some information on our process. You have two pathways when exchanging an item with us. The second option may result in a quicker turnaround for you, however, you will have a period of time where the funds from both orders have left your account. Order Cancellation / Modifications. If you change your mind, get in touch as soon as possible! Used or Damaged Merchandise. Any liquid or aerosol that has been opened or seal broken is non-returnable. If you’ve owned and used your product but it is within the 30-day return period we may still be able to help. If any items on your order arrive damaged, let us know ASAP. We will assist our customers in these claims but ask that you are patient as this process can take a little time. Our return address is provided below. Please keep a record of your return tracking information as we will not be held responsible for packages lost in transit on route back to us. EU International Orders: As of 1 January 2021, the UK is no longer in the European Union. If there are any problems or delays with your order we will notify you within 24 hours of the order being placed. All postcodes in England and Wales. Postcodes: AB1-AB16, AB21-AB25, AB30, AB39, DD, DG, EH, FK, G, KA (except KA27 and KA28), KY, ML, PA1-PA19, PH1-PH3 and TD. Any orders placed for the items in these areas will incur an additional charge. Postcodes: AB31-AB38, AB40-AB56, IV1-IV28, IV30-IV32, IV36, IV40, IV52-IV54, IV63, KW1-KW14, PA21-PA38, PH4-PH41, PH49-PH50 and BT (Northern Ireland). The same as Zone C but with items incurring a greater charge. Postcodes: HS, IV41-IV49, IV51, IV55-IV56, KA27-KA28, KW15-KW17, PA20, PA41-PA49, PA60-PA78, PH42-PH44, ZE, IM, GY and JE. The item “Rezo Front Brake Wavy Stainless Rotor Discs Pair Suzuki GSF 600 S Bandit 96-04″ is in sale since Tuesday, September 21, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Brake Discs”. The seller is “motorcycle-parts-warehouse” and is located in Southwick. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Viet nam, Russian federation.
  • Brand: Rezo
  • Manufacturer Part Number: REZ-F903XB-2
  • Item Condition: New
  • Type: Floating
  • Colour: Black
  • Material: Stainless Steel
  • MPN: REZ-F903XB-2
Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 S Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 650 S BANDIT 2005-2006 FRONT & REAR STAINLESS BRAIDED BRAKE KIT GS” is in sale since Saturday, October 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 650 ABS BANDIT 2005-2006
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime
Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Abs Bandit 2007-2008 Front Stainless Braided Brake Kit Gs

Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 650 ABS BANDIT 2007-2008 FRONT STAINLESS BRAIDED BRAKE KIT GS” is in sale since Saturday, October 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 650 ABS BANDIT 2007-2008
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime
Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Suzuki Gsf 650 Bandit 2005-2006 Front & Rear Stainless Braided Brake Kit Gs

Highest quality materials and construction. All of Patriot brake line components are made in Germany, USA. This guarantees the highest quality with materials which have been certified and tested. All of our brake lines are designed, made and tested to the specifications of the Federal Motor vehicle Safety Standard 106 and are therefore street legal. Assembled by our own team of experienced professionals. Since 1978 with over 75 years of combined experience in braking technology our staff ensures each and every kit meets our exacting standards. All of our brake line kits are assembled, tested and quality checked in our Anaheim , orange county facility. On tracks across the country professional racers rely on the strength of Patriot Brake Lines.. If you are serious about racing and trying to save weight: Patriot brake lines are the lightest brake lines on the market! Guaranteed for the life of the original owner and original motorcycle. 99 color combinations of lines and fittings. Choose any combination to dress up your bike or car. Tight weave stainless steel braid with 96 wires. DU PONT PTFE – Teflon lining. Crimp sleeves are high grade stainless steel. All lines DOT approved. 99 Color combinations of lines and fittings. Standard and Custom designs. Allows for 180 degree rotation of banjo fitting for correct alignment. Eliminates line swell, provides better performance and consistent feel. Reduces line expansion and provides greater durability. Better durability and longevity. Quality assurance and peace of mind. Allows you to personalize your bike. Back on the road sooner. HOW TO CHOOSE YOUR OPTIONS. Please provide us with your color choices as shown below. This is where you will enter the color combo you want. Quality You Can Count on Since 1978. Assembled in the USA , with precision German parts & equipment. Patriot braking applies the expertise gathered from years in world class Motorsport Competition in design, engineering and testing of ever Patriot brake hose and fitting. The difference between winning and losing is a very fine line On every mile of every race track the importance of high performance precision braking control has been proven. Total feel and response give you the confidence you need on the road. The difference between an average rider and a great rider is those who can control speed and those who cannot. Speed is nothing without control and it’s a very fine line – Which is why Patriot Braking only supply very fine lines. Each Patriot Braking kit is assembled in-house from the finest quality stainless steel fittings swaged directly to hard drawn tensile stainless steel braided hose. With our extensive automotive listings the complete kit will be manufactured to exact specifications, guaranteeing the look, the quality and the performance you demand. Patriot Braking eliminate that’spongy’ feeling often found with rubber hoses under extreme braking conditions – the time when performance is needed the most. By replacing the original rubber hoses with our complete system you will remove this sponginess and your braking will deliver new levels of precision. Don’t risk using inferior brake lines when you can trust us to improve braking reliability and performance What’s Stopping You? Manufactured in accordance with the requirements of Federal Motor Vehicle Safety Standard No. 106 for Street Use. All Patriot braking brake line kits are made in our Orange county factory. Premium Brake Line Kits are for OEM routing, single line w/stiffener, Sport 2 way, Race 3 way, Vintage superbike. Patented fitting torsion system eliminates line twist. We have complete kits for motorcycles or as individual lines for custom applications. Steel braided brake lines are available with clear, black, vintage black, red, translucent red, blue, white, orange, green, yellow, smoke or translucent blue covering. Fittings are available in silver, gold, chrome, blue, black, purple, red, or titanium. Every kit is made as it is ordered, typically same or next day. In-house testing of brake lines BY GERMAN EQUIPMENT and to Dot/TUV standards. All of our components are either made in the USA or made in Germany using certified materials and to the highest standards. Patriot Braking brake lines are maintenance free and will provide reliable service for the life of your motorcycle. Orders are usually dispatched within 24 hours (Monday-Saturday excluding holidays). All braided lines are made to order, so please bear with us during busy periods. If you dont like something or arent happy then please send it back to us. These things happen and we will try and do all we can to sort any issue for you. Its what we do. If you are returning the goods because they are damaged or faulty, we will reimburse you the cost of returning them. For any other reason you will need to pay to return the goods. We recommend you use a trackable post service in case it goes missing. If you live locally to us, pop in and well be glad to help. Returning by Post Please send the goods back with a copy of your invoice or order number to. Patriot Racing Industries 4343 e la palma ave ANAHEIM CA 92807 UNITED STATES OF AMERICA. It would also be helpful if you could include a note explaining the reason for the return. Certifiably Superior since 1978. Quality means everything to us, and to our customers. When it comes to brakes, compromise simply isnt an option especially in highly competitive motorsport environments where safety and victory can both depend on our products. Trusted Globally Thats why all our hoses are tested rigorously in house using our Germany 9TUV certified equipment and on the racetrack, where theyre proven time and time again. Our hoses meet and exceed regulatory requirements all over the world, making them road legal anywhere. The passion Motogpwerks have for prototyping and manufacturing high quality motorcycle exhausts and silencers has made them the idea choice supplier for classic Japanese and some British motorcycle stainless exhaust full systems. Motogpwerks can proudly say that their products are 100% USA. From the raw material to the finished product, nearly every aspect of small production is within the Motogpwerks which means that Motogpwerks can apply their high-quality control standards at every step of the way. After the initial prototyping every model of exhaust is dyno tested before being assembled with Motogpwerks modern and consistently updated Dyno jet 250ix machinery. Motogpwerks aims to satisfy the needs of classic Japaneseand British motorcycle enthusiasts with a range of high quality affordable stainless exhausts as valid alternatives to the original race equipment off yesteryear. Since late 70s Cal-fab were the only ones building aluminum heat treated swingarms, Motogpwerks resurrected cal-fab USA Brand has been setting the worldwide standard in custom vintage swingarm manufacturing. Here at Motogpwerks we build more vintage aftermarket swingarms than anyone on the planet, and for three good reasons: Quality, Performance, Value. Our quality begins in the manufacturing process. All arms are made in house at our facility using our exclusive tested bridged extruded aluminum alloy material along with precision cnc machined billet components. These parts are then hand fit and assembled using the most technically advanced welding system available today. We are also the only swingarm company that still heat treats to a 2 Stage process to provide the best swingarm for high powered vintage motorcycles with the same look as yester year. The performance of our products is legendary, since the mid 70s racers around the world have trusted the name Cal-Fab to give them the advantage they need to perform at the top level of their sport. Here at motogpwerks our swingarms are built to stand the test of time, and your satisfaction is always guaranteed. Cal-fab also manufactures exhaust, race brake calipers and a line off vintage performance products. The best way to service your Motorcycle is by ensuring the parts you use are the best ones. The same can be said for the gaskets you use. The parts are important when it comes to the classics. Werks Gaskets produces all gaskets in shop from high quality composite fiber material which meet or exceed OEM specs. Premium vintage gaskets, made in house at Patriot Racing industries. Fluid resistance found in our layered fiber gaskets provide excellent seal ability in a variety of environments under short duration temperatures. Using only the finest USA made gasket material. 24hrs turnaround from a placed order. 0.010-0.030 Gasket gauge, custom orders. The item “SUZUKI GSF 650 BANDIT 2005-2006 FRONT & REAR STAINLESS BRAIDED BRAKE KIT GS” is in sale since Saturday, October 17, 2020. This item is in the category “eBay Motors\Parts & Accessories\Motorcycle Parts\Brakes & Suspension\Brake Lines & Hoses”. The seller is “patriot-racing-industries” and is located in Anaheim, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Croatia, Malaysia, Brazil, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Material: Braided Stainless with Teflon
  • Manufacturer Part Number: SUZUKI GSF 650 BANDIT 2005-2006
  • Brake Line Color: Clear
  • Banjo Color: GREY
  • Brand: PATRIOT BRAKING
  • Warranty: Lifetime