600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, April 22, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Pistons are in great working condition as is the rest of the calipers. Caliper joint bolts have been replaced with stainless steel items. Comes with bleed nipples, banjo bolts and pad pins. Also has the original bolts that mount the calipers to the forks. These calipers are in good overall condition and it is rare to find a set that hasn’t rotted the pistons out or is covered in brake dust! These calipers will provide you with trouble free braking for thousands of miles. I have coated the calipers with ACF-50 which should keep them cleaner for longer! If you are unsure whether these calipers fit your model please ask me. I believe that these calipers will fit other models of motorbike (most notably ZZR’s and ZXR’s with some fettling) but you’ll have to do your own research on that! They will fit a few different models of Suzuki too I believe (GSX1250 Bandit, SV1000 amongst others). Any questions please let me know. The item “Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico” is in sale since Tuesday, April 27, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “nicosillylegs” and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • Brand: Suzuki
  • Type: Complete Caliper
  • Classic Motorcycle Part: No
  • Machine Type: Street Motorcycle
  • Intended Use: Replacement Part
Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico

Pistons are in great working condition as is the rest of the calipers. Caliper joint bolts have been replaced with stainless steel items. Comes with bleed nipples and pad pins. These calipers are in good overall condition and it is rare to find a set that hasn’t rotted the pistons out or is covered in brake dust! These calipers will provide you with trouble free braking for thousands of miles. I have coated the calipers with ACF-50 which should keep them cleaner for longer! If you are unsure whether these calipers fit your model please ask me. I believe that these calipers will fit other models of motorbike (most notably ZZR’s and ZXR’s with some fettling) but you’ll have to do your own research on that! They will fit a few different models of Suzuki too I believe (GSX1250 Bandit, SV1000 amongst others). These are one of the cleanest sets of GSXR calipers I have seen in a long while. Any questions please let me know. The item “Suzuki GSXR 600 K1 K3 Front Brake Calipers Refurbished ZXR ZZR Bandit Tokico” is in sale since Sunday, April 11, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “nicosillylegs” and is located in Stoke-on-Trent. This item can be shipped to United Kingdom.
  • Brand: Suzuki
  • Type: Complete Caliper
  • Classic Motorcycle Part: No
  • Manufacturer Part Number: Does Not Apply
  • Intended Use: Replacement Part
600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Just fit pads (not supplied), bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Sunday, February 21, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

600 1200 Bandit Tl Sv Srad Fully Refurbished Front Rear Brake Caliper Look

A genuine OEM Tokico fully refurbished rear brake caliper. Came from a SV650 machine, but also fits other models, like the TL1000, 600 and 1200 Bandits, Hayabusa and 600 SRAD. Please check against your existing caliper or consult one of the Suzuki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. Stainless steel mounting bolts. New banjo bolts and crush washers. New bleed nipples and rubber caps. New high-tensile caliper half bolts. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! A genuine bargain at this price! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit it yourself, then please consult a qualified motorcycle mechanic. The item “600 1200 BANDIT TL SV SRAD FULLY REFURBISHED FRONT REAR BRAKE CALIPER LOOK” is in sale since Thursday, February 18, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Bangladesh, Belize, Bermuda, Barbados, Cayman islands, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Montserrat, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS

Look at these beauties….. A genuine pair of OEM Nissin fully refurbished front brake calipers. 90mm between mounting hole centres, and will fit other Suzuki/Kawasaki models as an upgrade. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Had been well looked after in a previous life, but have benefited by the following. Fully stripped and cleaned. New stainless steel mounting bolts. New stainless steel caliper half bolts. New banjo bolts and crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. All backing shims are fitted to the new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “1200 BANDIT (mk1) AND OTHERS 90mm FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, March 4, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: NISSIN
No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “No. 2 600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, February 18, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS

A genuine pair of OEM Tokico fully refurbished front brake calipers. Came from a SV650S machine, but also fits other models, like the Mark 2 600 Bandit, and also some Kawasakis. Please check against your existing calipers or consult one of the Suzuki/Kawasaki forums for further assistance. Fully stripped and cleaned. Stainless steel pad retaining pins. New high-tensile mounting bolts. New stainless steel banjo bolts and copper crush washers. New bleed nipples and rubber caps. Carefully reassembled using Girling red brake grease on the seals and pistons. Keeps water and salt out and extends the life of the (new) seals and the pistons. Complete with new brake pads. Just fit, bleed and go! Note: My refurbished calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. If you can’t fit them yourself, then please consult a qualified motorcycle mechanic. The item “600 BANDIT (mk2) SV650S FULLY REFURBISHED FRONT CALIPERS” is in sale since Thursday, February 18, 2021. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom.
  • Country/Region of Manufacture: Japan
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: TOKICO
Suzuki GSF600S MK2 Bandit 2000 2004 FRONT BRAKE CALIPERS (REFURBISHED)

Suzuki GSF600S MK2 Bandit 2000 2004 FRONT BRAKE CALIPERS (REFURBISHED)

Suzuki GSF600S MK2 Bandit 2000 2004 FRONT BRAKE CALIPERS (REFURBISHED)

Suzuki GSF600S MK2 Bandit 2000 2004 FRONT BRAKE CALIPERS (REFURBISHED). AS YOU WILL SEE THESE WERE STRIPPED CLEANED AND REBUILT USING NEW SEALS AND PADS. Taken from a running 2003 machine which I have broken due to exhaust studs snapping in the head. Other parts available see my other items. Bike picture is for illustration only. Track Page Views With. Auctiva’s FREE Counter. The item “Suzuki GSF600S MK2 Bandit 2000 2004 FRONT BRAKE CALIPERS (REFURBISHED)” is in sale since Sunday, October 25, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “bag*master” and is located in Swindon. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Bangladesh, Belize, Bermuda, Barbados, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Montserrat, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay, Cayman islands.
  • Country/Region of Manufacture: Japan
  • Machine Type: Street Motorcycle
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Manufacturer Part Number: 59100-33D81-999
  • Reference OE/OEM Number: 59100-33D81-999
  • Other Part Number: 59300-33D81-999
  • Brand: Suzuki
  • Intended Use: Replacement Part
Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

Suzuki Bandit 1200 Fully Refurbished Front Brake Calipers

A quality pair of genuine Suzuki Nissin (OEM) fully refurbished front brake calipers. Came from a 1200 Bandit (Mark 1). 90mm between mounting hole centres, so will fit other Suzuki models also. Fully stripped and cleaned. All calcified crud removed from the seal grooves. Brake fluid galleries have been cleaned out. Pistons are in great condition and have been polished. Has been refurbished with the following. New stainless banjo bolts and copper washers. New stainless steel caliper half bolts. New bleed nipples and rubber caps. Complete with top pad springs, pad pins, R clips and brand new semi-sintered pads. Carefully reassembled using silicone clear brake grease on the seals and pistons. Keeps water and salt out and extends the life of the internal parts. Just bolt on and bleed properly. ALWAYS check that there are no leaks after first fitting and before trying them out on the road. As they are new pads they will require’bedding in’ to give optimum performance. Good OEM ones are getting rare to find now. You may not find a complete, cleaner one for sale on here at this price. Any questions about fitment – please message me. I might be able to help. Please check photos CAREFULLY against your old calipers. My calipers usually sell out quickly, so don’t miss out. Please be careful when bleeding any brake calipers to ensure that no brake fluid leaks on to them or onto the discs. Use a rag around the banjo bolt holes and bleed nipples when connecting and screw the bolts in FINGER TIGHT by hand then finish off with a torque wrench or similar. When bleeding with a rubber tube over the bleed nipple, tighten the nipple first (do NOT overtighten) then remove the tube by pinching the end before removing (as the tube will be full of fluid), then lift clear. Any fluid spillage on the calipers need to be removed IMMEDIATELY with warm soapy water and a clean cloth or sponge. Dab around the area. Do not use solvents to clean. Double check for any leaks before riding the bike after fitment. The item “SUZUKI BANDIT 1200 FULLY REFURBISHED FRONT BRAKE CALIPERS” is in sale since Saturday, June 20, 2020. This item is in the category “Vehicle Parts & Accessories\Motorcycle Parts\Brakes & Brake Parts\Callipers & Parts”. The seller is “neiorangepeel” and is located in wallasey, merseyside. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Canada, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Bangladesh, Belize, Bermuda, Barbados, Cayman islands, Dominica, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Martinique, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Bahamas, Colombia, Kuwait, Philippines, Qatar, Uruguay.
  • Non-Domestic Product: No
  • Modified Item: No
  • Country/Region of Manufacture: Japan
  • Custom Bundle: No
  • Unit Quantity: 1
  • Type: Complete Caliper
  • Brand: NISSIN